All You Need to Know About Assessment Validation and Validating Assessments

All You Need to Know About Assessment Validation and Validating Assessments

Blog Article

Among the numerous obligations RTOs face post-registration—annual declarations, AVETMISS reporting, marketing compliance—validation is often the most dreaded.

Even though we've covered validation in depth, let’s revisit its definition. ASQA defines validation as a quality review of the assessment process.

Put simply, validation checks which parts of an RTO's assessment process are accurate and spots areas for enhancement. A proper understanding of its main elements can make validation less daunting.

According to SRTOs 2015 Clause 1.8, RTOs must ensure that their assessment systems, including RPL, comply with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.

The standards necessitate conducting two types of validation.

The first validation type ensures your RTO's assessments comply with the training package requirements in your scope.

The second type of validation verifies assessments are conducted according to the principles of assessment and rules of evidence.

This shows that validation happens pre- and post-assessment. We will focus on the first type—assessment tool validation.

Breaking Down the Two Types of Assessment Validation

Exploring the Concept of Assessment Validation

As we mentioned earlier and in our past blogs, validation consists of two parts: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, also known as pre-assessment validation or verification, pertains to the first part of the clause, focusing on ensuring all unit requirements are met and that all workbooks are fully compliant.

In post-assessment validation, the emphasis is on implementation, ensuring that Registered Training Organisations conduct assessments as per the Principles of Assessment and Rules of Evidence.

Here, we will concentrate on assessment tool validation.

Methods for Conducting Assessment Tool Validation

Having outlined the two types of validation, it’s time to dive into assessment tool validation.

Timing of Assessment Tool Validation

Assessment tool validation ensures that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

This implies that any time new learning resources are obtained, assessment tool validation must be done before student use.

You don’t need to wait until your next 5-year validation schedule. Immediately validate new resources to ensure they’re ready for student use.

However, this isn't the only time to perform this type of validation. Conduct assessment tool validation also when you:

- resources are updated by you
- when new training products are added on scope
- when course is reviewed against training product updates
- learning resources are identified as a risk during the risk assessment

ASQA's risk-based regulation approach requires RTOs to conduct regular risk assessments. Therefore, complaints from students about learning resources are a perfect time for assessment tool validation.

Selecting Training Products for Validation

Bear in mind, this validation is meant to ensure all learning resources are compliant before use. All RTOs are required to validate all unit resources.

Key Resources for Assessment Tool Validation

Training Materials

Given that you are conducting assessment tool validation, you will need the full array of your learning resources:

Mapping tool – start with this document. It illustrates which assessment items address unit requirements, making validation quicker.

Learner/student workbook – assess its appropriateness as an assessment tool. Confirm clear instructions and adequate answer fields. This is a common problem.

Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item exist. Clear benchmarks are essential for reliable assessment outcomes.

Other related resources – may include checklists, registers, and templates developed separately from the workbook and marking guide. Validate these to ensure they suit the assessment task and address unit requirements.

Validation Panel

Clause 1.11 defines the requirements for validation panel members, stating validation can involve one or more individuals. RTOs usually require all trainers and assessors to be present, sometimes including industry experts.

Collectively, your validation panel should have:

Vocational competencies and industry skills relevant to the unit being validated

Current knowledge and expertise in vocational teaching and learning

Any one of the following training and assessment qualifications:

TAE40116 Certificate IV in Training and Assessment or an equivalent successor

Validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool helps in both the validation process and documentation. It facilitates seeing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It can also serve as proof that you have validated your resources before allowing students to use them.

ASQA does not provide a recommended or required template for assessment tool validation, but many templates can be found online. These tools often have validators review the tools as a whole to verify if they meet the principles of assessment.

Assessment Principles Checklist Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Although these templates ease the validation process, they can cause errors in judgment as there is minimal space for commenting on each assessment item.

It is highly recommended to use a more detailed template for inspecting each unit requirement and the assessment items that map to them. Below is an example:

Element Performance Criteria Assessment Guidelines Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Inspected?

As highlighted in our blog post Common Problems In Assessment Tools, it is essential that your assessment tools enable trainers to adhere to assessment principles and evidence rules.

Fundamental Principles of Assessment
Fairness – Is the assessment process equitable and accessible to everyone?

Flexibility – Does the assessment offer various options to demonstrate competence based on different needs and preferences?

Validity – Does the assessment evaluate what it is intended to evaluate? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment give the same results every time, regardless of the trainer? Will different assessors make the same decision on skill competence?

Evidence Basic Rules

Validity – Does the evidence demonstrate that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there enough evidence to confirm the learner has the required skills and knowledge?

Authenticity – Does the assessment tool ensure that the work is the candidate’s own?

Currency – Are the assessment tools updated to reflect current units of competency and industry practices?

Despite being frequently covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.

To avoid employing learning resources that fail to meet all unit requirements, be sure to follow these guidelines:

Act on Your Words

Take note of the verbs used in the unit requirements and make sure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Carry out each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:

change diapers

bottle preparation, feeding babies from bottles, and cleaning equipment

solid food preparation and feeding babies

respond appropriately to baby signs and cues

prepare and settle infants for sleep

monitor and foster age-appropriate physical exploration and gross motor skills

Having students describe the nappy-changing process for babies under 12 months doesn’t fulfill the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.

Watch Out for the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut read more it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.

Full Compliance or Not Competent

Pay attention to lists. As illustrated above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Be More Specific

Every assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions do not confuse students or assessors. For example:
What kind of information can be included in a work package?
What information can be included in a work package?

Possible answers may include:

Necessary resources

Pertinent costs

Time assigned for activities

Allocated roles and responsibilities

When an assessment item requires multiple answers, specify how many answers a student must provide. This way, your assessment remains reliable, and the evidence collected is valid.

This is true for assessment items with double-barrelled questions or questions requiring more than one answer at the same time. These can confuse students and assessors, as shown in the sample question below:

Identify a hazard and/or environmental concern in the work area and select the most effective hazard control hierarchy.

Answers might include, but are not limited to:

Weather conditions – work area isolation, engineering controls, PPE

Work area and ground conditions – eliminating hazards, isolating, engineering

People – isolating, engineering, administration

Structural hazards – substitution, isolation, use of engineering controls

Chemical hazards – isolating, use of engineering controls, administrative controls

Equipment or machinery – isolation, use of engineering controls, administrative controls

Avoiding double-barrelled questions simplifies responses for students and allows assessors to accurately judge student competence.

Seeing these requirements, you might wonder, “Don’t learning resource developers provide audit guarantees?” However, these guarantees mean you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s wiser to take a safe and compliant approach.